The UL/CSA-listed E76 ELITE series digital vacuum ovens feature our 5-side chamber jacket heating system that covers left, right, up, down and backside of the chamber; all metal internal vacuum tubing (compare to rubber hose) for better vacuum levels and durability; and build-in secondary over-temp dial for enhanced over temperature protection. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.
Every one of our vacuum ovens goes through a 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.
Attention: Before initial use, run oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.
Features
- 5-side chamber jacket heating system covers left, right, up, down and backside of the oven, it provides perfect temperature uniformity and fast heating rates.
- Exceptional build and finish quality.
- Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
- Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
- Adjustable gas back fill capability via vent port
- Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
- Built-in swivel casters with locks for ultra portability.
- All ovens shipped from our New Jersey or Nevada location for quick delivery.
- Guarantee US based phone and email assistance within 30 minutes (except holidays and weekends) from our engineers.
- 2-year warranty and lifetime US-based parts and service support.
Vacuum oven specifications
Electrical requirements | 220V +/-10% 50/60Hz 1-PH 20.5A |
Power plug | No plug included. Customers will need to install plug base on their power setup |
Heaters | 4500 watts |
Temperature controller | Microcomputer PID control for heater output |
Temperature range | Ambient to 250°C |
Temperature accuracy | +/- 1°C |
Temperature uniformity | +/- 3% of setpoint |
Warm-up time to 100°F/37.7°C | 45 minutes |
Timer range | 99 hours 59 minutes |
Chamber capacity | 7.6 cubic feet (215 liters) |
Chamber material | Polished type 304 stainless steel |
Chamber dimensions | 23.6 x 23.9 x 23.6″ (WxDxH) |
Unit dimensions | 34 x 32 x 45″ (WxDxH) |
Shipping dimensions | 43.5 x 41.5 x 52″ (WxDxH) |
Vacuum level | Better than 500 microns/millitorrs |
Vacuum connector | KF25 flange |
Unit weight | 620 Lbs |
Shipping weight | 880 Lbs |
Shelf capacity | Seven (removable, come with oven purchase) |
Distance between each shelf | 3 1/4 inches |
Door gasket material | Silicone |
Safety | Built-in safety switch Circuit breaker Overheat protection Power failure auto reset Time up buzzer |
Observation window | 3/4″ tempered safety glass |
CE compliant | Yes |
Reviews
There are no reviews yet.